Browse Product Safety Test Equipment by Test Category
ED&D manufactures product safety test equipment used in electrical safety laboratories, product certification programs, compliance engineering environments, and production test environments. Browse equipment by test category and commonly referenced IEC, UL, CSA, EN, and MIL requirements.
Electrical Safety & Insulation Test Equipment
Equipment used for dielectric withstand testing, ground continuity verification, leakage current measurement, winding resistance and low-resistance measurement, and electrical load simulation in laboratory, certification, and production test environments. These systems are used for electrical safety evaluations under IEC, UL, CSA, and EN standards across appliance, IT, industrial, and medical applications.
Dielectric Withstand (Hipot Testing)
Automated AC and AC/DC hipot testers, thin-insulation test accessories, and functional verification devices for dielectric withstand testing, insulation evaluation, and daily pre-shift checks of hipot tester trip response.
View EquipmentGround Continuity / Protective Earth
High-current and digital systems for protective earth verification, ground continuity testing, and low-resistance ground-path verification in electrical safety and compliance testing.
View EquipmentLeakage Current Testing
Digital leakage current testers for laboratory, production-line, field, and medical electrical safety testing. Configurations include True RMS measurement, applied-voltage testing, and measurement networks specified by the applicable standard.
View EquipmentWinding Resistance & Micro-Ohm Measurement
Hot winding resistance systems and precision micro-ohmmeters for transformer temperature determination, multi-channel winding measurement, coil evaluation, and low-resistance measurement using four-wire Kelvin connections.
View EquipmentComparative Tracking Index
CTI and PTI test equipment for evaluating the tracking resistance of solid insulating materials under controlled electrical stress and contaminant exposure. Available systems include standard IEC configurations and dual IEC/ASTM configurations with camera-based observation and data acquisition.
View EquipmentKnife Switches
Manual knife switches for open-circuit and short-circuit fault-condition testing in electrical safety laboratories. Available in single-throw, double-throw, and fusible configurations with one to four poles for abnormal-condition test setups.
View EquipmentTest Probes for Access to Hazardous Parts & Shock Protection
Test probes, pin probes, rod probes, specialty probes, and probe kits used to verify protection against access to hazardous parts, evaluate enclosure openings, and check compliance with electrical shock protection and accessibility requirements.
Finger Probes
Jointed, rigid, UL, appliance-specific, and telecom-oriented finger probes for verifying protection against access to hazardous parts in safety and enclosure testing.
View EquipmentSpecialty Test Probes
Specialty probes including pins, rods, spheres, wedges, wires, hooks, telecom probes, and other clause-specific tools for accessibility, enclosure, and hazardous-part verification.
View EquipmentTest Probe Kits
Probe kits for accessibility testing in IT, medical, laboratory, household appliance, legacy audio/video, IP Code, and modular-jack applications. The category also includes electrical contact accessories and links to individual probe families when a complete kit is not required.
View EquipmentIngress Protection (IP) Testing Equipment
Equipment used for liquid ingress, solid ingress, and IP code verification, including drip boxes, combo drip box and spray chambers, rain test apparatus, IPX spray systems, jet nozzles, dust chambers, and specimen turntables.
Liquid Ingress Testing (IPX1–IPX6 / IPX6K)
Liquid ingress test equipment for drip, combination chamber, rain, IPX spray, and water-jet exposure, including drip boxes, integrated IPX1–IPX4 chambers, UL rain test apparatus, handheld spray nozzles, oscillating tubes, jet systems, high-capacity reservoir and pump systems, variable-speed water supply skids, digital pump-control upgrades, and specimen turntables.
View EquipmentSolid Ingress (IP5X / IP6X)
Solid ingress test equipment for dust-protected and dust-tight enclosure testing, including dust chambers, talcum handling accessories, and specified test media.
View EquipmentMechanical Strength, Impact, Abuse & Cord Testing
Equipment used to evaluate mechanical strength, impact resistance, repetitive handling damage, cable flexing durability, and test methods involving abuse, shock, and cord stress.
Impact Testing
Pendulum impact apparatus, adjustable and fixed-energy spring impact hammers, appliance-specific impact testers, copper impact testers, impact test balls, and other calibrated striking tools for mechanical strength and durability testing under IEC 60068-2-75, IEC 60335-2-4, UL 858, IEC 60601, and other applicable product safety standards.
View EquipmentMechanical Abuse Testing
Mechanical abuse test equipment including bump test apparatus and tumbling barrel machines for repeated shock and durability evaluation.
View EquipmentCord Anchorage & Cable Flexing
Flexing and cable test equipment for cord anchorage torque testing, repeated bending, and cable-stress evaluation of flexible cords and cord sets.
View EquipmentGlow Wire, Flame, Abnormal & Thermal Testing
Equipment used for glow wire testing, flame testing, and abnormal-operation or elevated-temperature testing.
Glow Wire Test Equipment
Glow wire test equipment for evaluating ignitability, flammability, and fire hazard when heated elements contact components or insulating materials.
View EquipmentFlame Test Equipment
Flame test equipment includes flame hoods, needle flame systems, burn-test burners, copper calibration blocks with thermocouples, and accessories for flammability, ignition-source testing, and burner verification.
View EquipmentAbnormal Testing Supplies & Thermal Fixtures
Supplies and supporting fixtures used for abnormal operation, ignition-risk, and elevated-temperature material testing. Products include indicator materials, cotton media, and ball pressure test equipment.
View EquipmentMeasurement, Verification Fixtures, Sharpness & Force Equipment
Equipment for creepage and clearance evaluation, sharp edge and sharp point hazard testing, force, torque, and stability verification, and constructional checks that require a specified physical condition before evaluation.
This category includes calipers, gauges, comparators, mandrels, force gauges, torque accessories, and test fixtures used to apply specified bending radii, forces, contact geometries, or dimensional limits.
Creepage, Clearance, Dimensional & Construction Verification
Feeler gauges, optical comparators, calipers, micrometers, mandrels, and related fixtures used to verify creepage distances, clearance spacing, insulation thickness, material geometry, and constructional requirements tied to electrical safety compliance.
This category also includes fixtures used to apply specified bend radii, contact geometries, or dimensional limits before evaluation.
View EquipmentSharp Edge & Sharp Point Test Equipment
Sharp edge and sharp point test equipment for toys, consumer products, and safety laboratories. Products include manual testers, automated tape-based systems, and accessory kits.
View EquipmentForce, Torque & Stability Test Equipment
Force gauges, torque accessories, and inclined-plane stability equipment for push/pull measurement, torque verification, and mechanical safety evaluation.
View EquipmentMedical Device Safety & Medical Bed Testing
Loading and entrapment assessment tools used in medical bed testing.
Additional Product Categories
Additional categories include specialty test equipment, reference materials, and product groups not listed in the primary sections above.
X-radiation Testing
Equipment for X-radiation product safety testing.
Other Safety Products
Product safety test equipment not assigned to another category.
Educational Publications
Reference and training materials for product safety test methods, standards, and laboratory practice.
Breaking Capacity Testing
Equipment for switching, interruption, and breaking-capacity testing.
Toy Testing Equipment
Equipment for toy product safety and compliance testing.
Corrosion Testing Equipment
Corrosion testing equipment available from Auto Technology Company.
Commonly Referenced Standards
Standards referenced across the product categories on this page include: